Contents
Springless Garage Door Systems GarageDoorSalesNearme.Com | If you’re looking to replace the springs in your existing garage door, you may be wondering whether a springless system is right for you.
This article will discuss Extension springs and Torsion springs, as well as two springless systems from Wayne Dalton and EverServe.
In addition, we’ll look at the advantages and disadvantages of each springless system. To make the decision easier, we’ve included a comparison chart of our top picks.
Springless Garage Door Systems
Torsion springs
There are two main types of spring systems: extension and torsion. Extension springs operate independently of each other and are outdated.
When the door opens and closes, one side may lift higher than the other. Torsion springs have the advantage of distributing the force evenly.
They last anywhere from 5,000 to 500,000 cycles. Torsion springs are also more durable than extension springs. They can also withstand more abuse than extension springs.
When determining the lifespan of your torsion springs, consider how much you use the garage door. If you use your garage door twice a day, a single spring can last up to ten years.
But, if you use your garage door more than two or three times a day, you may want to invest in a torsion spring that lasts longer.
While replacing the spring is relatively simple, it is important to remember that the spring is under extreme tension and should only be performed by a professional.
Before replacing the spring, measure the inside diameter of the spring. Measure the torsion spring with a tape measure. Then, measure the length of each half separately.
This way, you’ll be sure to get the exact length. However, keep in mind that measurements can be off by as much as 3/4 inch.
In addition to measuring the spring’s length, consider the height of the door itself. If you have less than 12 inches of headroom, double horizontal tracks are the best option.
When replacing the torsion springs on a springless garage door, you need to know the exact measurements of the torsion springs.
In some cases, it is possible to use the same springs for both sides. The first side’s spring is positioned closer to the end bracket, and the second side is placed further back. Torsion springs will also allow you to manually adjust the springs on the sides if necessary.
Extension Springs
If your door isn’t springless, you may need to replace the extension-springs. The springs in your door’s hinges are responsible for lifting and lowering the door.
A broken spring will reduce the overall door weight by 1/2 inch. You can replace the springs in your door by following the steps below. When you’ve finished, you’ll have a new door that works just as well as your old one.
First, make sure the garage door isn’t too high. Extension-springs can get worn down as time passes. A spring that’s 14 inches high won’t lift a seven-foot door, and vice-versa.
The length of the cable determines the price of other heights. Also, make sure you replace the cables every year, even if they’re only worn out.
The inside diameter of the spring is stamped on both the stationary and winding cone. The inside diameter of a spring’s wire is written on metal pieces attached to the door.
For example, P-200 would mean a two-inch inside diameter. The inside diameter of a spring in inches would be 1 3/4 inches.
However, you should not buy a spring that doesn’t fit your door, even if you know the manufacturer and model number of the door.
Unlike standard extension springs, long life springs are longer lasting and last about three times as long. You may need to replace the safety cables in your garage door after purchasing a spring for your garage door.
Some people also prefer long-life springs. These springs are usually a bit more expensive than standard extension springs, but may be better suited for some sites and circumstances.
You can choose the type that best suits your needs by examining the safety features of the springs and the cost of their replacement.
Springless Garage Door Systems Models
EverServe(tm) Model 610S
The EverServe(tm) Model 610S springless garage door is a heavy duty rolling service door that is easy to maintain and service.
Its springless design gives you a long life expectancy and minimizes maintenance. Its insulated slats also keep out strong weather, making it ideal for outdoor applications. Here are three key benefits of the 610S.
Designed to provide up to 500,000 cycles of operation, EverServe models offer easy serviceability and enhanced cycle life.
They also feature a fenestration option to provide visibility and air circulation. They’re ideal for replacing parking garage grilles, as well.
Their durable design and three-year limited warranty will help keep you safe and productive. This springless garage door is the perfect solution for all your commercial needs.
Wayne Dalton Models 800 HC and 800C HC
The Model 800HC and 800CHC springless garage door systems are among the premier manufacturers of garage door solutions.
The springless technology of these doors gives them up to 25 times more cycle life than a standard rolling service door, and the three-year, 500,000-cycle warranty protects you from premature costs. Moreover, the springless design allows them to be serviced using universal components, ensuring less downtime.
Both models of the springless high-cycle rolling service doors are available in steel, aluminum and stainless steel. Moreover, they come with four standard polyester finishes and can be customized with more than 200 different powder-coat colors and accessories.
The springless high-cycle service doors are perfect for commercial, industrial, and residential garages that require a large amount of heavy-duty traffic. Aside from that, they feature a lifetime warranty and a 500,000-cycle cycle.
Puls garage Door Springs
To determine the size of your Puls garage door springs, use a tape measure to measure the distance between the two spring halves. You should also have a mechanical bathroom scale handy.
To measure the spring, lift the door slightly, slide the scale underneath and slowly lower it to record the weight. Alternatively, you can ask a Puls technician to measure the springs for you. They will take the proper measurements and perform the repair.
Having a garage door that doesn’t function properly may be the result of a broken spring. When the spring is broken, it cannot lift the closed side of the door, and the clips and loops that hold the door together are no longer functional.
If the spring is broken, this could be a sign of a more serious problem that requires a professional service. To determine whether your Puls garage door springs are failing, contact a Puls technician today to schedule a free inspection.
After you’ve removed the rusted spring, you’ll need to install a new one. To replace the springs, simply follow the steps outlined in the installation guide.
First, remove the lower winding bar. Then, insert the new spring, taking care to hold it securely. Then, take the cable drum and the spring from its bracket. The new spring will slide onto the bar and onto the cable drum. Finally, reinstall the cables, and you’re all set!
Torsion and extension springs are similar in that they can last anywhere from seven to nine years. The lifespan of these springs is determined by the amount of use and the frequency of repairs.
While both types of springs are useful, the main difference between these springs is that the torsion springs can be more expensive to replace. The other type is called a double-loop spring, and this spring consists of two coils.